Product Bulletin - Controlled Atmosphere Aluminum Brazing Furnace Systems
Active Only® Semi-Continuous CAB Aluminum Brazing Furnace
 |
| Active Only CAB Aluminum Brazing Furnace |
The Active Only Semi-Continuous CAB Aluminum Brazing Furnace system is an indexing furnace designed to meet the needs of aftermarket manufactures or companies that have a wide variety of production needs from day to day. The furnace is designed to braze 3 to 5 load areas per hour on a semi-continuous basis. The system is capable of processing a useful load area that can be loaded with various aluminum heat exchangers not to exceed 70 kg (150 lbs) of product and fixtures. The products will be in a horizontal position on the conveyor belt (or tray) and a nominal heating time in the braze chamber of 15 to 30 minutes is expected depending upon the mass of the load area.
The unique feature of the SECO/WARWICK patented convection muffle arrangement is the placement of our braze cycle time control thermocouples. These thermocouples are the heart of this "intelligent" system and the indexing cycle when loading the furnace intermittently. This feature allows loading of the furnace load areas with products that have different masses, one right after another, without adjusting the furnace parameters. The heat exchanger alloys must stay the same but the mass of the cores may change from load area to load area. Active Only furnaces are equipped with SECO/WARWICK's patented ACCUBRAZE Control Systems.
Typical System Configuration
 |
P. O. Box 908 180 Mercer Street Meadville, PA 16335-6908 USA
Phone (814)332-8400 - Fax (814)724-1407
info@secowarwick.com
©1995-2008 SECO/WARWICK Corporation All Rights Reserved.
The latest design, materials and equipment specifications should be obtained from the company before any reliance is placed on the enclosed since changes may occur due to product improvement.
Return to Home | CAB Brazing