Visit SECO/WARWICK at 81. HeatTreatmentCongress 2025
2025-09-30 00:00 - 2025-10-02 19:00 (Europe/Berlin) | Dorint-Pallas-Hotel Auguste-Viktoria-Straße 15, 65185, Wiesbaden, Germany
HeatTreatmentCongress the largest European congress on topics of heat treatment and materials technology, manufacturing and process engineering.

This year, in Wiesbaden (Germany), SECO/WARWICK, as the 1st Choice Supplier of Solutions for Vacuum Heat Treatment, will present modern, energy efficient and ecological vacuum heat treatment equipment.

Our expert, Marcin Przygoński, will deliver a lecture on SECO/WARWICK’s top technology:
/ Date: October 2nd, Thursday 2:20 pm
/ Speaker: Marcin Przygoński
Low Pressure Carburizing Increasing Efficiency Sustainability and Cost Effectiveness in Heat Treatment

Discover top solutions for heat treatment of metals at our stand:

Pit-LPC Vacuum Carburizing Furnaces Alternative for atmosphere carburizing, which achieved the maximum of its possibilities. Pit-LPC = cost reduction, taking care of the environment, production increase – all this is possible due to the process being carried out in vacuum and in higher temperatures.
Vector – a single-chamber vacuum furnace using gas quenching for a wide variety of heat-treating processes and applications. This technology provides important capabilities for obtaining highly uniform results in heat-treated parts, high process consistency in workloads, and high speeds in batch processing with low consumption of electrical power and process gases.
Vector HV – is a horizontally or vertically oriented single-chamber high vacuum furnace using gas cooling which can be used for a wide variety of heat-treating processes and applications. It provides important capabilities for producing high uniformity in heat-treated parts, high process cleanness, high consistency in workloads, and efficient processing with low consumption of power and process gases.
CaseMaster Evolution T – a triple-chamber vacuum furnace designed for high-volume heat treatment processes such as low-pressure carburizing (LPC), annealing or vacuum brazing, combined with gas or oil quenching in semi-continuous production mode. The system is built with three separate, functional chambers: the loading and pre-heating chamber, process chamber, quenching and unloading chamber.
ZeroFlow – a modern, energy-saving, and ecological gas nitriding technology used in HRN/VRN type furnaces, allowing for the precise development of the preset composition of the nitrided layer, composed only of alpha, alpha+gamma’ or alpha+gamma’+ epsilon phase, while maintaining minimum ammonia consumption, and thus, minimum emissions of post-process gasses.

Visit our booth and get to know our experts.
