BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//SECO/WARWICK//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
BEGIN:VTIMEZONE
TZID:Europe/Berlin
X-LIC-LOCATION:Europe/Berlin
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CESTDTSTART:19700329T020000
RRULE:FREQ=YEARLY;INTERVAL=1;BYDAY=-1SU;BYMONTH=3
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:19701025T030000
RRULE:FREQ=YEARLY;INTERVAL=1;BYDAY=-1SU;BYMONTH=10
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
UID:88c9115a646a715b8365342ccd612ac6@seco-warwick.com
DTSTAMP:20260404T025353
DTSTART;TZID=Europe/Berlin:20260701T000000
DTEND;TZID=Europe/Berlin:20260703T190000
SUMMARY;CHARSET=UTF-8:Visit SECO/WARWICK at A3TS Congress and Exhibition 2026 | booth 70
DESCRIPTION:A3TS brings together key players from the materials processing sector in Dunkirk — the epicenter of European reindustrialization — for the 52nd A3TS Congress and Exhibition under the theme “Heat and Surface Treatments for a Sustainable Industry.” This is the place to discover breakthrough technologies for a carbon‑free industry, connecting with leading contractors and research centers, and EXCHANGE ideas during 70 high‑level technical conferences.\n\nDuring this event, the SECO/WARWICK Group, as the 1st Choice Supplier of Solutions for Vacuum Heat Treatment, will present its top vacuum technologies.\n\nDiscover leading solutions for metal heat treatment at our stand:\n\n 	Vector – a single-chamber vacuum furnace using gas quenching for a wide variety of heat-treating processes and applications. This technology provides important capabilities for obtaining highly uniform results in heat-treated parts, high process consistency in workloads, and high speeds in batch processing with low consumption of electrical power and process gases.\n 	CaseMaster Evolution D – a double-chamber vacuum furnace designed for high-volume heat treatment processes such as low-pressure carburizing (LPC), annealing or vacuum brazing, combined with gas or oil quenching in semi-continuous production mode. The system is built with three separate, functional chambers: the loading and pre-heating chamber, process chamber, quenching and unloading chamber.\n 	Vacuum Aluminum Brazing (VAB) – technology is gaining in importance due to its environmental friendliness and process cleanliness. VAB furnaces provide reliable and repeatable brazing results in a wide range of furnaces, tailored to each customer’s expectations and requirements.\n 	Pit-LPC Vacuum Carburizing Furnaces Alternative for atmosphere carburizing, which achieves maximum productivity. Pit-LPC = cost reduction, taking care of the environment, production increases – all this is possible due to the process being carried out in vacuum and in higher temperatures.\n 	Super IQ – a new-generation Integral Quench (IQ) furnace designed for low-pressure carburizing applications. This solution is designed so that it can be added to existing atmosphere carburizing furnace process lines without any need to significantly modify the existing infrastructure.\n 	ZeroFlow – a modern, energy-saving, and ecological gas nitriding technology used in HRN/VRN type furnaces, allowing for the precise development of the preset composition of the nitrided layer, composed only of alpha, alpha + gamma’ or alpha + gamma’+ epsilon phase, while maintaining minimum ammonia consumption, and thus, minimum emissions of post-process gasses.\n\n \n\nVisit our booth #70 and get to know our expert.\n\nThe SECO/WARWICK team would love to meet you at this event!
LOCATION:Venue: Le Kursaal - Palais des Congrès de Dunkerque Address: 7 bis Place du Casino  City: 59240 Dunkerque, France 
URL:https://en.a3ts.org/evenements/mattris-by-a3ts-2026
END:VEVENT
END:VCALENDAR