Visit SECO/WARWICK at ASM Heat Treat Show 2025 | booth #1317
2025-10-20 00:00 - 2025-10-23 19:00 (Europe/Berlin) | Detroit, Michigan, USA Huntington Place, 1 Washington Blvd, Detroit, MI 48226
The ASM Annual Meeting brings together leading professionals, innovators, and decision-makers to engage in strategic discussions, celebrate achievements, and shape the future of materials engineering.

At the 33rd Heat Treating Society Conference and Exhibition, SECO/WARWICK Group, as the 1st Choice Supplier for Heat Treatment and Metallurgy, will present top technologies.

The focus will be on vacuum and atmospheric heat treatment technologies, including the following products:

Vector – a single-chamber vacuum furnace using gas quenching for a wide variety of heat-treating processes and applications. This technology provides important capabilities for obtaining highly uniform results in heat-treated parts, high process consistency in workloads, and high speeds in batch processing with low consumption of electrical power and process gases.
CaseMaster Evolution T – a triple-chamber vacuum furnace designed for high-volume heat treatment processes such as low-pressure carburizing (LPC), annealing or vacuum brazing, combined with gas or oil quenching in semi-continuous production mode. The system is built with three separate, functional chambers: the loading and pre-heating chamber, process chamber, quenching and unloading chamber.
4D Quench — is a vacuum heat treatment system solution for individual quenching of component parts such as gears, shafts, bearing races, rings, selves, etc. made of standard or custom case and through hardening steels. The system operates under nitrogen. It provides excellent distortion control and notably increases precision and repeatability of heat treatment while reducing unit and overall production costs.
ZeroFlow – a modern, energy-saving, and ecological gas nitriding technology used in HRN/VRN type furnaces, enabling the precise development of the preset composition of the nitrided layer, composed only of alpha, alpha+gamma’ or alpha+gamma’+ epsilon phase, while maintaining minimum ammonia consumption, and thus, minimum emissions of post-process gasses.
Rotary Retort Furnaces – rotary retort furnaces are specifically designed for continuous production and uniform heat treating of small parts, such as coins, small hardware, nails, bearings, chain components, and fasteners, such as nuts, bolts, and screws.
Roller Hearth Furnaces – roller hearth furnaces are designed to heat treat a wide variety of products economically with uniform, repeatable results. Efficient, continuous annealing of steel castings and forgings.
Mesh Belt Type Furnaces - are designed for heat treatment and thermo-chemical treatment of small elements, ensure homogeneous, repeatable technological results.

We are looking forward to seeing you at booth #1317 SECO/WARWICK.
