BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//SECO/WARWICK//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
BEGIN:VTIMEZONE
TZID:Europe/Berlin
X-LIC-LOCATION:Europe/Berlin
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CESTDTSTART:19700329T020000
RRULE:FREQ=YEARLY;INTERVAL=1;BYDAY=-1SU;BYMONTH=3
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:19701025T030000
RRULE:FREQ=YEARLY;INTERVAL=1;BYDAY=-1SU;BYMONTH=10
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
UID:ec4b1ba2f2bb30343b08769dafce7dbe@seco-warwick.com
DTSTAMP:20260404T101612
DTSTART;TZID=Europe/Berlin:20241001T000000
DTEND;TZID=Europe/Berlin:20241003T230000
SUMMARY;CHARSET=UTF-8:Visit SECO/WARWICK at 29th IFHTSE World Congress 2024 | booth #517 and #519
DESCRIPTION:The ASM Heat Treating Society (HTS) and the International Federation for Heat Treatment and Surface Engineering (IFHTSE) proudly present the highly anticipated 29th IFHTSE World Congress, a premier global event dedicated to “Innovations in Heat Treatment and Surface Engineering for a Sustainable Future.”\n\nSECO/WARWICK Group, the 1st Choice Supplier of Solutions for Green Heat Treatment, will present top vacuum and atmosphere technologies.\n\nThe focus will be on the following products:\n\n 	Vector® – Vector is a single-chamber vacuum furnace using a gas quench that can be used for a wide variety of heat treating processes and applications. It provides important capabilities for producing high uniformity in heat treated parts, high process consistency in workloads, and high speeds in batch processing with low consumption of power and process gases.\n 	CaseMaster Evolution T – is a triple-chamber vacuum furnace designed for high volume case hardening processes based on low pressure carburizing (LPC) and gas quenching in the semi-continuous production mode. The system is built with three separate, functional chambers: a loading and pre-heating chamber, process chamber (LPC), gas quenching and unloading chamber.\n 	ZeroFlow® – a modern, energy-saving, and ecological gas nitriding technology used in HRN/VRN type furnaces, allowing for the precise development of the preset composition of the nitrided layer, composed only of alpha, alpha+gamma’ or alpha+gamma’+epsilon phase, while maintaining minimum ammonia consumption, and thus, minimum emissions of post-process gases.\n 	Pit-LPC Vacuum Carburizing Furnaces An alternative for atmosphere carburizing, that achieves the maximum of its potential. Pit-LPC = cost reduction, taking care of the environment while increasing production capacity – all this is possible due to the process being carried out in vacuum and in higher temperatures.\n 	Rotary Retort Furnaces – rotary retort furnaces are specifically designed for continuous production and uniform heat treating of small parts, such as coins, small hardware, nails, bearings, chain components, and fasteners, such as nuts, bolts, and screws.\n 	Roller Hearth Furnaces – roller hearth furnaces are designed to heat treat a wide variety of products economically with uniform, repeatable results. The system produces continuous annealing for the efficient production of high quality steel castings and forgings.\n\n \n\nWe are looking forward to seeing you at Booth SVT #517 SWC #519\n\nThe SECO/WARWICK team would love to meet you at this event!
LOCATION:City: Clevland, OHIO  
URL:https://www.asminternational.org/ifhtse-congress/ 
END:VEVENT
END:VCALENDAR