The SVW Heat Treatment Symposium 2026 will once again be held at the University of Applied Sciences Northwestern Switzerland. You can look forward to exciting presentations on the topic of heat treatment by international speakers.

SECO/WARWICK, as the 1^st Choice Supplier of Solutions for Vacuum Heat Treatment, will present modern, energy efficient and ecological equipment.

To be one step ahead, consider:

Vector — a single-chamber vacuum furnace using a gas quench that can be used for a wide variety of heat treating processes and applications. It provides important capabilities for producing high uniformity in heat treated parts, high process consistency in workloads, and high speeds in batch processing with low consumption of power and process gases.
Vacuum Aluminum Brazing (VAB) – technology is gaining in importance due to its environmental friendliness and process cleanliness. VAB furnaces provide reliable and repeatable brazing results in a wide range of furnaces, tailored to each customer’s expectations and requirements.
CaseMaster Evolution T– The triple-chamber vacuum furnace designed for high volume case hardening processing based on low pressure carburizing (LPC) and gas quenching in the semi-continuous production mode. The system is built with three separate, functional chambers: a loading and pre-heating chamber, process chamber (LPC), gas quenching and unloading chamber.
Pit-LPC Vacuum Carburizing Furnaces — An alternative to atmosphere carburizing, that maximizes its performance potential. Pit-LPC = cost reduction, taking care of the environment, production increases – all this is possible due to the process being carried out in vacuum and at higher temperatures.
Super IQ – This new-generation Integral Quench Furnace is designed for low pressure carburizing applications. The unit is designed so that it can be added to existing process lines of carburizing furnaces without any need to significantly modify the existing infrastructure.
ZeroFlow – The modern, energy-saving, and ecological gas nitriding technology used in HRN/VRN type furnaces, allowing for the precise development of the preset composition of the nitrided layer, composed only of alpha, alpha+gamma’ or alpha+gamma’+epsilon phase, while maintaining minimum ammonia consumption, and thus, minimum emissions of post-process gases.

Visit our booth and get to know our experts.

The SECO/WARWICK team would love to meet you at this event!

Schedule an appointment:

events@secowarwick.com

Before you schedule an appointment, please get to know with SECO/WARWICK Information Clause and Privacy Policy
More >>>

Personal data is processed for the purpose of scheduling an appointment with you. The data controller is SECO/WARWICK S.A., with headquarters in Świebodzin, ul. Sobieskiego 8, 66-200. You may contact us by sending a letter to our address or by sending e-mail to RODO@secowarwick.com.
As a data subject you have the following rights: a right to request from the data controller access to and rectification or erasure of your personal data or restriction of processing or to object to processing as well as a right to data portability. You have also the right to lodge a complaint with the data protection supervisory authority, which in Poland is the President of the Personal Data Protection Office (Prezes Urzędu Ochrony Danych Osobowych). Information about competent supervisory authorities for other countries is available at https://edpb.europa.eu/about-edpb/board/members_en.
More information on personal data processing can be found in our Privacy Policy available at: https://www.secowarwick.com/en/data-privacy/.