Your browser does not support JavaScript! ASM Heat Treat Show 2023 - SECO/WARWICK

ASM Heat Treat Show 2023

At the ASM Heat Treating Society Conference and Exhibition, SECO/WARWICK Group, as the 1st choice solution supplier for green heat treatment and metallurgy, will present top technologies.

The focus will be on vacuum and atmospheric heat treatment technologies, including the following products:

  •  Vector – a single-chamber vacuum furnace using gas quenching for a wide variety of heat-treating processes and applications. This technology provides important capabilities for obtaining highly uniform results in heat-treated parts, high process consistency in workloads, and high speeds in batch processing with low consumption of electrical power and process gases.
  • CaseMaster Evolution T – a triple-chamber vacuum furnace designed for high-volume heat treatment processes such as low-pressure carburizing (LPC), annealing or vacuum brazing, combined with gas or oil quenching in semi-continuous production mode. The system is built with three separate, functional chambers: the loading and pre-heating chamber, process chamber, quenching and unloading chamber.
  • Pit-LPC – an alternative to atmosphere carburizing, which achieves  maximum carburizing efficiency using vacuum technology. Pit-LPC = cost reduction, taking care of the environment, production increases – all this is possible due to the process being carried out in vacuum at higher temperatures.
  • Super IQ – a new-generation Integral Quench (IQ) furnace designed for low-pressure carburizing applications. This solution is designed so that it can be added to existing atmosphere carburizing furnace process lines without any need to significantly modify the existing infrastructure.
  • ZeroFlow – a modern, energy-saving, and ecological gas nitriding technology used in HRN/VRN type furnaces, enabling the precise development of the preset composition of the nitrided layer, composed only of alpha, alpha+gamma’ or alpha+gamma’+ epsilon phase, while maintaining minimum ammonia consumption, and thus, minimum emissions of post-process gasses.
  • Rotary Retort Furnaces – rotary retort furnaces are specifically designed for continuous production and uniform heat treating of small parts, such as coins, small hardware, nails, bearings, chain components, and fasteners, such as nuts, bolts, and screws.
  • Roller Hearth Furnaces – roller hearth furnaces are designed to heat treat a wide variety of products economically with uniform, repeatable results. Efficient, continuous annealing of steel castings and forgings.

 

If you want to learn more about vacuum heat treatment technology, you must see this lectures!

/ Date: October 17th, 01:40 pm
/ Speaker: Don Marteeny
Reduce Carbon Footprint with LPC

Reduce Carbon Footprint with LPC

/ Date: October 18th, 04:00 pm
/ Speaker: Tom Hart
Carburizing with 4D Quench

Carburizing with 4D Quench

 

We are looking forward to seeing you at booth #2101 SECO/VACUUM and #1918 SECO/WARWICK.

SECO/VACUUM will also be hosting a Wellness Lounge near the ASM membership lounge on the expo floor, with 3 FREE massage therapists, infused water, fresh fruit and healthy local snacks  throughout each day of the exhibit.

Schedule an appointment:

events@secowarwick.com

Before you schedule an appointment, please get to know with SECO/WARWICK Information Clause and Privacy Policy
More >>>

Personal data is processed for the purpose of scheduling an appointment with you. The data controller is SECO/WARWICK S.A., with headquarters in Świebodzin, ul. Sobieskiego 8, 66-200. You may contact us by sending a letter to our address or by sending e-mail to RODO@secowarwick.com.
As a data subject you have the following rights: a right to request from the data controller access to and rectification or erasure of your personal data or restriction of processing or to object to processing as well as a right to data portability. You have also the right to lodge a complaint with the data protection supervisory authority, which in Poland is the President of the Personal Data Protection Office (Prezes Urzędu Ochrony Danych Osobowych). Information about competent supervisory authorities for other countries is available at https://edpb.europa.eu/about-edpb/board/members_en.
More information on personal data processing can be found in our Privacy Policy available at: https://www.secowarwick.com/en/data-privacy/.

Calendar / of Events

Seco Warwick News
Seco Warwick Newsletter
Seco Warwick Linkedin
Seco Warwick Facebook
Seco Warwick Youtube
Secology
УЗНАТЬ
БОЛЬШЕ