A3TS Congress and Exhibition 2026

A3TS brings together key players from the materials processing sector in Dunkirk — the epicenter of European reindustrialization — for the 52^nd A3TS Congress and Exhibition under the theme “Heat and Surface Treatments for a Sustainable Industry.” This is the place to discover breakthrough technologies for a carbon‑free industry, connecting with leading contractors and research centers, and EXCHANGE ideas during 70 high‑level technical conferences.

During this event, the SECO/WARWICK Group, as the 1^st Choice Supplier of Solutions for Vacuum Heat Treatment, will present its top vacuum technologies.

Discover leading solutions for metal heat treatment at our stand:

• Vector – a single-chamber vacuum furnace using gas quenching for a wide variety of heat-treating processes and applications. This technology provides important capabilities for obtaining highly uniform results in heat-treated parts, high process consistency in workloads, and high speeds in batch processing with low consumption of electrical power and process gases.
• CaseMaster Evolution D – a double-chamber vacuum furnace designed for high-volume heat treatment processes such as low-pressure carburizing (LPC), annealing or vacuum brazing, combined with gas or oil quenching in semi-continuous production mode. The system is built with three separate, functional chambers: the loading and pre-heating chamber, process chamber, quenching and unloading chamber.
• Vacuum Aluminum Brazing (VAB) – technology is gaining in importance due to its environmental friendliness and process cleanliness. VAB furnaces provide reliable and repeatable brazing results in a wide range of furnaces, tailored to each customer’s expectations and requirements.
• Pit-LPC Vacuum Carburizing Furnaces Alternative for atmosphere carburizing, which achieves maximum productivity. Pit-LPC = cost reduction, taking care of the environment, production increases – all this is possible due to the process being carried out in vacuum and in higher temperatures.
• Super IQ – a new-generation Integral Quench (IQ) furnace designed for low-pressure carburizing applications. This solution is designed so that it can be added to existing atmosphere carburizing furnace process lines without any need to significantly modify the existing infrastructure.
• ZeroFlow – a modern, energy-saving, and ecological gas nitriding technology used in HRN/VRN type furnaces, allowing for the precise development of the preset composition of the nitrided layer, composed only of alpha, alpha + gamma’ or alpha + gamma’+ epsilon phase, while maintaining minimum ammonia consumption, and thus, minimum emissions of post-process gasses.

Visit our booth #70 and get to know our expert.

The SECO/WARWICK team would love to meet you at this event!

Let's/Meet

Chwiałkowski Łukasz

Inżynier Serwisu