Your browser does not support JavaScript! 29th IFHTSE World Congress 2024 - SECO/WARWICK

29th IFHTSE World Congress 2024

The ASM Heat Treating Society (HTS) and the International Federation for Heat Treatment and Surface Engineering (IFHTSE) proudly present the highly anticipated 29th IFHTSE World Congress, a premier global event dedicated to “Innovations in Heat Treatment and Surface Engineering for a Sustainable Future.”

SECO/WARWICK Group, the 1st Choice Supplier of Solutions for Green Heat Treatment, will present top vacuum and atmosphere technologies.

The focus will be on the following products:

  • Vector® – Vector is a single-chamber vacuum furnace using a gas quench that can be used for a wide variety of heat treating processes and applications. It provides important capabilities for producing high uniformity in heat treated parts, high process consistency in workloads, and high speeds in batch processing with low consumption of power and process gases.
  • CaseMaster Evolution T – is a triple-chamber vacuum furnace designed for high volume case hardening processes based on low pressure carburizing (LPC) and gas quenching in the semi-continuous production mode. The system is built with three separate, functional chambers: a loading and pre-heating chamber, process chamber (LPC), gas quenching and unloading chamber.
  • ZeroFlow® – a modern, energy-saving, and ecological gas nitriding technology used in HRN/VRN type furnaces, allowing for the precise development of the preset composition of the nitrided layer, composed only of alpha, alpha+gamma’ or alpha+gamma’+epsilon phase, while maintaining minimum ammonia consumption, and thus, minimum emissions of post-process gases.
  • Pit-LPC Vacuum Carburizing Furnaces An alternative for atmosphere carburizing, that achieves the maximum of its potential. Pit-LPC = cost reduction, taking care of the environment while increasing production capacity – all this is possible due to the process being carried out in vacuum and in higher temperatures.
  • Rotary Retort Furnaces – rotary retort furnaces are specifically designed for continuous production and uniform heat treating of small parts, such as coins, small hardware, nails, bearings, chain components, and fasteners, such as nuts, bolts, and screws.
  • Roller Hearth Furnaces – roller hearth furnaces are designed to heat treat a wide variety of products economically with uniform, repeatable results. The system produces continuous annealing for the efficient production of high quality steel castings and forgings.

 

We are looking forward to seeing you at Booth SVT #517 SWC #519

The SECO/WARWICK team would love to meet you at this event!

Schedule an appointment:

events@secowarwick.com

Before you schedule an appointment, please get to know with SECO/WARWICK Information Clause and Privacy Policy
More >>>

Personal data is processed for the purpose of scheduling an appointment with you. The data controller is SECO/WARWICK S.A., with headquarters in Świebodzin, ul. Sobieskiego 8, 66-200. You may contact us by sending a letter to our address or by sending e-mail to RODO@secowarwick.com.
As a data subject you have the following rights: a right to request from the data controller access to and rectification or erasure of your personal data or restriction of processing or to object to processing as well as a right to data portability. You have also the right to lodge a complaint with the data protection supervisory authority, which in Poland is the President of the Personal Data Protection Office (Prezes Urzędu Ochrony Danych Osobowych). Information about competent supervisory authorities for other countries is available at https://edpb.europa.eu/about-edpb/board/members_en.
More information on personal data processing can be found in our Privacy Policy available at: https://www.secowarwick.com/en/data-privacy/.

Calendar / of Events

Seco Warwick News
Seco Warwick Newsletter
Seco Warwick Linkedin
Seco Warwick Facebook
Seco Warwick Youtube
Secology
DOWIEDZ SIĘ
WIĘCEJ