Vacuum Furnace for Oil Removal
Removing residual oil from the molding or stamping process of parts before subsequent heat treatment.
In Short: A vacuum furnace for oil removal cleans residual oil from molded or stamped parts. It is used before further heat treatment, most often before soldering. The part must be clean before soldering.
How the oil removal process works:
- The part is heated under vacuum to the temperature at which the oil evaporates.
- A multi-zone heating system controls the furnace temperature precisely.
- A specially designed pump system extracts the oil vapor from the furnace space.
- The vapor is condensed in the outlet system.
- The recovered oil is stored in a dedicated tank.
/ Customizable according to customer requirements
/ High-quality and optimal surface protection of parts
/ Low consumption of energy, process gases, and other utilities
/ Environmentally friendly with minimal process gas emissions
/ Simple, modular design tailored and adapted to the tasks and conditions of the plant
/ Guaranteed quality and reproducible process results
/ Preventive maintenance support
/ Remote control and monitoring
/ Fast delivery and straightforward installation
Technical specifications:
| Standard horizontal capacity | 1300 kg and above |
| Operating temperature | 380 °C |
| Temperature uniformity | ±6 °C / ±10 °F |
| Pressure control | Partial pressure control |
| Vacuum level | High vacuum processing up to 10-2 mbar |
| Cooling gas | N2 |
| Control system | Computerized PLC + IPC, user-friendly |
| Standards | Compliance with global industry standards |
Functions for Maintenance and Control with SecoVac Automatic Furnace Control System.
/ Functional, user-friendly, intuitive system
/ Uninterruptible power supply (UPS)
/ Comprehensive visualization and management of emergency situations
/ Automatic generation of predefined reports (graphical or numerical) with export options
/ Hierarchy of user access levels
/ Remote control and monitoring
/ Individual configuration of all data analysis charts and printouts
/ Full integration with SCADA software – no additional software installation required
Production Functions
/ User-friendly programming of furnace system processes
/ Advanced process management with an unlimited number of recipes
/ System safeguards against the erroneous selection of technological programs
Operational Functions
/ Operating time counters, ability to schedule periodic inspections
/ Support for multiple languages
/ Thermocouple life monitoring
/ Stored history of unit operation
/ Media consumption monitoring, with optional refill warnings
/ Two-stage warning alarm – color-coding allows immediate identification of alarms
/ Easy system backup
Management Features
/ Integration with higher-level management systems
/ Data security through different levels of user access
/ Production optimization based on collected information
/ Reduced operator workload due to production automation
/ Programmable delay of process start time/date with GSM (Global System for Mobile Communication) notification option
/ Long-term data logging and remote access to archived information
/ Application browser provides “read-only” access to data
Model Dimensions
450x2000x3000 WxHxL
Dedicated Auxiliary Equipment
/ Manual and/or automatic loaders
/ Stainless steel instrumentation
/ Closed Cooling Water System (ZOWOCH, a closed-circuit water cooling unit)
/ Gas buffer tank
/ Noise protection for the pumping system
/ Dew point measurement system at the gas inlet
/ Temperature distribution basket or Datapaq
/ Time-saving spare parts kit
Control System Options
/ Control system selection: PLC, IPC
/ Managed power control system
/ Independent data logger
/ Remote control and monitoring
/ Air-conditioned control cabinet
/ Special
/ Automotive
/ Machinery
/ Aluminum alloys
/ Vacuum as a protective and technological atmosphere eliminates the need to use harmful process gases and their emission to the environment
/ No CO₂ emissions, no use of fossil fuels
/ Gas utilization for cooling (nitrogen, argon), captured and returned to the air, neutral for the environment
/ Reinforced thermal insulation saves electricity (approx. 20%)
/ High energy efficiency of used electrical components (IE3 class motors, inverter control, etc.)
/ Application of systems and algorithms limiting energy and technological factor consumption (pumping, heating and cooling systems)
/ No harmful substance emissions
/ Reduction of hardening deformations and downstream machining costs
/ Elimination of part washing after heat treatment
Frequently Asked Questions
What is a vacuum furnace for oil removal used for?
It removes residual oil from parts made by molding or stamping. Oil removal is done before further heat treatment, most often before soldering, because the part must be clean.
How does vacuum oil removal work?
The part is heated under vacuum until the oil evaporates. A pump system extracts the oil vapor, which is condensed in the outlet system. The recovered oil is stored in a dedicated tank.
What are the key technical parameters of the oil removal furnace?
Standard horizontal capacity of 1300 kg and above, operating temperature of 380 °C, temperature uniformity of ±6 °C (±10 °F), high vacuum up to 10-2 mbar and nitrogen as the cooling gas.
How is the oil removal furnace controlled?
The SecoVac automatic control system (PLC + IPC) offers recipe management, remote control and monitoring, report generation, alarms and full SCADA integration.
What is ZOWOCH?
ZOWOCH is the closed cooling water system offered as dedicated auxiliary equipment. It cools the furnace in a closed circuit.



