Complete carburizing line
General Information:
/ Complete carburizing line consisting of furnace type CASE MASTER AFS-5E, BREW-5E, BREN-5S, Washing device WBSD-5E, Endogenerator G-21ET, Automatic loading trolley type TASKMASTER -5S
/ Manufacturer SECO/WARWICK
/ Year of production: 2013
/ Location: Southern Poland
/ Furnace continuously serviced and in good condition (standard aerospace)
/ We offer technical evaluation, relocation, and installation of the equipment at the destination site within the EU
Technical Data
| Electrically heated sealed quench (in-out) furnace type CASEMASTER AFS-5E | |
| Useful dimensions of heating chamber | 610x610x910 mm (height, width, length) |
| Operating temperature range | 750 °C – 1000 °C |
| Charge weight gross | 500 kg |
| Heating power ca. | 84 kW |
| Quenching oil | |
| Electrically heated air circulating batch furnace BREW-5E | |
| Useful dimensions of heating chamber | 610x610x910 mm (height, width, length) |
| Operating temperature range | 400 °C – 650 °C |
| Charge weight gross | 500 kg |
| Heating power ca. | 46 kW |
| Electrically heated cycling batch furnace BREN-5ES | |
| Useful dimensions of heating chamber | 610x610x910 mm (height, width, length) |
| Operating temperature range | (-80)C – 200°C |
| Charge weight gross | 500 kg |
| Total electric power ca. | 36 kW |
| Cooling water demand ca. | 4 m3/h |
| Washing machine type WBSD-5E | |
| Useful dimensions of heating chamber | 610x610x910 mm (height, width, length) |
| Operating temperature range | 60°C – 80°C |
| Charge weight gross | 500 kg |
| Total electric power | 131 kW |
| Immersion and spray washing | |
| Endogenarator G-21ET | |
| Capacity | 21 Nm3/h |
| Installed power | 15 kW |
|
Gas consumption: |
|
|
– Propane 1,6 Nm3/h or |
|
|
– Methane 4,3 Nm3/h |
|
| Nominal temperature | 1050 °C |
| Transfer car TASKMASTER-5S hot load operating unit | |
| Installed power ca. | 5,0 kW |
| Charge gross weight | 500 kg (max. temp. of 580 deg C). |
