A3TS & ECHT 2024

The Heat Treatment and Surface Treatment Show is the largest trade fair in Europe. This event, organized by the A3TS brings together the ECHT 2024 European Conference and the 50th Congress and the A3TS Exhibition. The industry’s key players – principals, suppliers, research laboratories, technical centers for heat treatment, surface treatment – will meet at this show.

This year in Toulouse (France) SECO/WARWICK Group the 1^st Choice Supplier of Solutions for Green Heat Treatment will present top vacuum technologies.

Discover top solutions for the heat treatment of metals at our stand:

• Vector – a single-chamber vacuum furnace using gas quenching for a wide variety of heat-treating processes and applications. This technology provides important capabilities for obtaining highly uniform results in heat-treated parts, high process consistency in workloads, and high speeds in batch processing with low consumption of electrical power and process gases.

• Pit-LPC Vacuum Carburizing Furnaces Alternative for atmosphere carburizing, which achieved the maximum of its possibilities. Pit-LPC = cost reduction, taking care of the environment, production increase – all this is possible due to the process being carried out in vacuum and in higher temperatures.

• CaseMaster Evolution T – a triple-chamber vacuum furnace designed for high-volume heat treatment processes such as low-pressure carburizing (LPC), annealing or vacuum brazing, combined with gas or oil quenching in semi-continuous production mode. The system is built with three separate, functional chambers: the loading and pre-heating chamber, process chamber, quenching and unloading chamber.
• Super IQ – a new-generation Integral Quench (IQ) furnace designed for low-pressure carburizing applications. This solution is designed so that it can be added to existing atmosphere carburizing furnace process lines without any need to significantly modify the existing infrastructure.
• ZeroFlow – a modern, energy-saving, and ecological gas nitriding technology used in HRN/VRN type furnaces, allowing for the precise development of the preset composition of the nitrided layer, composed only of alpha, alpha + gamma’ or alpha + gamma’+ epsilon phase, while maintaining minimum ammonia consumption, and thus, minimum emissions of post-process gasses.

Visit our booth #43 and get to know our experts.

The SECO/WARWICK team would love to meet you at this event!

Let's/Meet

Chwiałkowski Łukasz

Sales Manager