The 1st Thermal Processes Congress in Brazil” is a two-day conference where, SECO/WARWICK as the 1st Choice Supplier, will present modern, energy-efficient, and environmentally friendly vacuum heat treatment equipment with guaranteed technology. Our expert, Lukasz Chwialkowski will present four lectures on leading SECO/WARWICK technologies:
/ Date: March 14th, 2:50 pm – 3:30 pm
„Control your Production and Technology in an Efficient and Simple Way“
/ Date: March 15th, 9:20 am – 10:00 am
“VAB – Vacuum Aluminum Brazing – The Influence of the Electric Car (EV) Market”
/ Date: March 15th, 11:10 am – 11:50 am
“The Vacuum Furnace to Reduce the Gear Distortion – Continuous Production with a One Piece Flow Precision Case Hardening System (LPC) for High Volume Gear Manufacturing”
/ Date: March 15th, 2:50 pm – 3:30 pm
„Low Pressure Carburizing as an Alternative to Traditional Carburizing”
/ Speaker: Łukasz Chwiałkowski
To be one step ahead, consider:
- Vector® – Vector is a single-chamber vacuum furnace using a gas quench that can be used for a wide variety of heat treating processes and applications. It provides important capabilities for producing high uniformity in heat treated parts, high process consistency in workloads, and high speeds in batch processing with low consumption of power and process gases.
- CaseMaster Evolution T – is a triple-chamber vacuum furnace designed for high volume case hardening processing based on low pressure carburizing (LPC) and gas quenching in the semi-continuous production mode. The system is built with three separate, functional chambers: a loading and pre-heating chamber, process chamber (LPC), gas quenching and unloading chamber.
- Super IQ® – This new-generation Integral Quench Furnace is designed for low pressure carburizing applications. The unit is designed so that it can be added to existing process lines of carburizing furnaces without any need to significantly modify the existing infrastructure.
- ZeroFlow® – a modern, energy-saving, and ecological gas nitriding technology used in HRN/VRN type furnaces, allowing for the precise development of the preset composition of the nitrided layer, composed only of alpha, alpha+gamma’ or alpha+gamma’+epsilon phase, while maintaining minimum ammonia consumption, and thus, minimum emissions of post-process gases.
Visit our booth and get to know our expert.
The SECO/WARWICK team would love to meet you at this event!
Schedule an appointment:
Personal data is processed for the purpose of scheduling an appointment with you.
The data controller is SECO/WARWICK S.A., with headquarters in Świebodzin, ul. Sobieskiego 8,
66-200. You may contact us by sending a letter to our address or by sending e-mail to RODO@secowarwick.com.
As a data subject you have the following rights: a right to request from the data controller access to and rectification or erasure of your personal data or restriction of processing or to object to processing as well as a right to data portability. You have also the right to lodge a complaint with the data protection supervisory authority, which in Poland is the President of the Personal Data Protection Office (Prezes Urzędu Ochrony Danych Osobowych). Information about competent supervisory authorities for other countries is available at https://edpb.europa.eu/about-edpb/board/members_en.